Phone: 337-475-5874
Fax: 337-475-5286
Box 91735
Lake Charles, LA 70609
engineering@mcneese.edu http://mcneese.edu/ceet/engtech

Electronics - ELTR 234

Introduction to Microcontrollers and Programming

• Calculate and convert using different numbering systems, integer math and Boolean logic
• Define and describe general architecture and features, memory types, and application of a microcontroller.
• Describe and recall the architecture, programming, and interface requirements of a BASIC STAMP.
• Program: properly define variables, use different types of branch and loop, properly display the outcomes, debug the codes, and other special commands required in BS2 programming.   
• Install the software, set up the hardware and test the system for a BS2 board used in the class. Communicate between BS2 and PC.
• Design, wire and control one and multiple LEDs using BS2 programming. Modify the LED circuits according to application requirements.
• Design, wire digital input circuits using pushbuttons, monitor pushbuttons and take corresponding actions by BS2 programming.
• Use pushbuttons to control LEDs; Scan and Debounce Multiple Inputs
• Wire, test and control a servo.
• Wire, test and control 7-Segment LED Display.
• Control frequency and sound effects using a speaker.
• Wire, test and control a character LCD.

Prepared by: Qiu Liu, PhD